ENC CODEC FIRMWARE UPGRADE PACKAGE


TinyENC1≠ENC1

Do not use the ENC1 firmware upgrade package when upgrading TinyENC1 firmware, otherwise you can only return to the company for repair.

If you accidentally upgrade ENC1 to TinyENC1, and you are the program developer, you can try to download the repair tool to fix (need serial cable and dismantle the machine). TinyENC1 repair tool download:


2023-11-30

– Optimized segment recording function
– NTP synchronization increases the timing synchronization interval
– Fixed the problem of abnormal recording and pulling stream caused by NTP synchronization
– Fixed udp out-of-order issues in ENC1V3, ENCSHV2 and other models
– Fixed an issue where no more than 8 channels could open an effect
– In addition to ENCSH models, a new background management page has been added, which can switch freely between the classic version (original) and the standard version

This firmware update package only supports 20230630 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230630 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-10-31

– New frame synchronization Settings in encoding Settings page
– Added streaming compatibility Settings on multi-platform live page, compatible with h265 encoding to push streaming to youtube
– Optimize NTP synchronization
– Optimized coding logic for audio-only network streams
– System low-level optimization

This firmware update package only supports 20230630 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230630 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-09-28

– Optimized coding logic for no-audio network streams
– Optimized no-audio USB camera encoding logic
– Optimize the frame rate of the device NDI encoding
– Fixed an issue where ENC2V2 does not recognize USB network cards
– Fixed the watermark scaling problem caused by low resolution pull-stream and NOSIGNAL screen switching

This firmware update package only supports 20230630 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230630 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-08-31

– Fixed http interface get/set watermark exception
– Fixed an issue where the value of latency parameter could not be greater than 1000 after the output of srt protocol
– Optimized 4K output for ENC1V3 and ENCSHV2 models
– ENC1V3, ENC1-Plus2, ENC5V2 models, HDMI output increased horizontal mirror function
– Remote access page under advanced Settings, added Rtty access device mode
– System low-level optimization

This firmware update package only supports 20230630 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230630 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-07-31

– fixed the large capacity storage device, and the disk space shows no doubt
– Fixed the ENC5V2 model, restoring the factory Settings with small probability of exception
– The SDI input supports the Level B standard
– Added remote control support for ENC1V3,ENC4S,ENCSHV2 models
– Add new storage mount Settings under the extension function, support nfs mount, windows shared directory mount and disk specific partition mount

This firmware update package only supports 20230426 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230426 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-06-30

Fixed the problem of increasing memory usage caused by invalid push stream address
Fixed output Settings page, playback address display issues
Added the function of restoring user Settings after upgrading by upgrading package

This firmware update package only supports 20230531 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230426 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-05-31

Added the function of periodically enabling or disabling stream pushing
Optimize Onvif PTZ function for some models
Optimize integrated communication capabilities
Optimize device memory usage
Adjust the port status display logic on the home page
Fixed roi setting feature
Fixed an issue where the push duration was incorrectly displayed when the system time was changed after the push duration was enabled
Fixed an ENC1 button failure problem
Support the new Internet-based wechat mini program, no longer rely on LAN, really do anytime, anywhere view

This firmware update package only supports 20230426 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230426 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-04-26

Fixed buffer control for B-frame decoding
Reduced cpu usage for MP3 encoding
Supports the latest insta360Link firmware
Fixed an exception to the network flow overlay effect in individual cases
Fixed abnormal display of decoded illustrations when zooming, rotating, etc
Fixed abnormal network flow rotation on some models
Solve the problem of srt resolving ipv6 domain names
Replace the upgrade package or resource upload component
Video carousel support decoding, recoding (that is, U disk playback, push stream)
The lab added a new matting function, that is, green screen matting

This firmware update package only supports 20230426 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230426 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-03-22

Running status page, fixed the problem of network status up-down display

On the coding setting page, under the video parameter module, the video network stream clipping rotation function is added, and the NTSC compatible frame rate mode is added to the HDMI/SDI channel

Under the audio parameter module, the audio source selection supports the selection of audio from other video channels

On the output setting page, add the main stream/secondary stream address (identification) user-defined function under the playback address module

Added the functions of exporting and importing configuration files in batches and selecting a time zone on the System Settings page

Multi-platform live page, new main stream/auxiliary stream selection function

By default, the nosignal screen function is displayed when network traffic has nosignal. You can enable/disable this function on the fac.php page

Fixed incorrect translation of some pages and optimized other features

New lab module in menu bar, including GB28181 support, ROI interest coding area, Insta360 camera control, Onvif PTZ control, audio and video synchronization adjustment function

PS: The laboratory module is an experimental function, please use it as appropriate

Note: applicable to any version after 20221201


2022-11-16

Added the online detection and upgrade function
Added firmware online search function
rtsp output stream, added the account password authentication function
The USB flash drive assistant function is added under the extension function
Compatible with video stream decoding including B frames
Fixed Abnormal network status when using wifi NIC
Optimize the function of the intercom
H5 player page added h265 encoding playback support (Playing h265 encoding video streams requires high performance on the computer, in case of playback lag, please replace the computer with a better performance)
ENC1, ENC1V2, and ENC1 Plus models support wifi6 NIC 2.0

Note: applicable to any version after 20211201


2022-07-12

Fix the audio collection exception when the USB camera is used and the system restarts the device
After the USB camera is inserted and removed, the USB camera audio cannot be collected
Increase of Encoder program file handles caused by optimizing invalid SRT streams
Fixed custom layout manager loading exception
Added HTTP API interfaces to all models and optimized HTTP API URL matching rules
Change the login box to horizontal and vertical center, remove the fill color when the input box automatically fills in the password
Fix the fault that multiple network adapters fail to obtain the network status
The intercom function of ENC1, ENC1V2 and ENC1Plus models is changed to speak by pressing the button
Fixed an issue with group setting secondary flow

Note: applicable to any version after 20211201


2023-05-31

Added the function of periodically enabling or disabling stream pushing
Optimize Onvif PTZ function for some models
Optimize integrated communication capabilities
Optimize device memory usage
Adjust the port status display logic on the home page
Fixed roi setting feature
Fixed an issue where the push duration was incorrectly displayed when the system time was changed after the push duration was enabled
Fixed an ENC1 button failure problem
Support the new Internet-based wechat mini program, no longer rely on LAN, really do anytime, anywhere view

This firmware update package only supports 20230426 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230426 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-04-26

Fixed buffer control for B-frame decoding
Reduced cpu usage for MP3 encoding
Supports the latest insta360Link firmware
Fixed an exception to the network flow overlay effect in individual cases
Fixed abnormal display of decoded illustrations when zooming, rotating, etc
Fixed abnormal network flow rotation on some models
Solve the problem of srt resolving ipv6 domain names
Replace the upgrade package or resource upload component
Video carousel support decoding, recoding (that is, U disk playback, push stream)
The lab added a new matting function, that is, green screen matting

This firmware update package only supports 20230426 and later versions. For other versions, please download the firmware upgrade
After updating this version, if you need to downgrade it, please use the upgrade package of the corresponding version, and do not directly use the upgrade package earlier than 20230426 to downgrade it (note that the upgrade will overwrite the device configuration information, please back up as required).


2023-03-22

Running status page, fixed the problem of network status up-down display

On the coding setting page, under the video parameter module, the video network stream clipping rotation function is added, and the NTSC compatible frame rate mode is added to the HDMI/SDI channel

Under the audio parameter module, the audio source selection supports the selection of audio from other video channels

On the output setting page, add the main stream/secondary stream address (identification) user-defined function under the playback address module

Added the functions of exporting and importing configuration files in batches and selecting a time zone on the System Settings page

Multi-platform live page, new main stream/auxiliary stream selection function

By default, the nosignal screen function is displayed when network traffic has nosignal. You can enable/disable this function on the fac.php page

Fixed incorrect translation of some pages and optimized other features

New lab module in menu bar, including GB28181 support, ROI interest coding area, Insta360 camera control, Onvif PTZ control, audio and video synchronization adjustment function

PS: The laboratory module is an experimental function, please use it as appropriate

Note: applicable to any version after 20221201


2022-11-16

Added the online detection and upgrade function
Added firmware online search function
rtsp output stream, added the account password authentication function
The USB flash drive assistant function is added under the extension function
Compatible with video stream decoding including B frames
Fixed Abnormal network status when using wifi NIC
Optimize the function of the intercom
H5 player page added h265 encoding playback support (Playing h265 encoding video streams requires high performance on the computer, in case of playback lag, please replace the computer with a better performance)
ENC1, ENC1V2, and ENC1 Plus models support wifi6 NIC 2.0

Note: applicable to any version after 20211201


2022-07-12

Fix the audio collection exception when the USB camera is used and the system restarts the device
After the USB camera is inserted and removed, the USB camera audio cannot be collected
Increase of Encoder program file handles caused by optimizing invalid SRT streams
Fixed custom layout manager loading exception
Added HTTP API interfaces to all models and optimized HTTP API URL matching rules
Change the login box to horizontal and vertical center, remove the fill color when the input box automatically fills in the password
Fix the fault that multiple network adapters fail to obtain the network status
The intercom function of ENC1, ENC1V2 and ENC1Plus models is changed to speak by pressing the button
Fixed an issue with group setting secondary flow

Note: applicable to any version after 20211201


2022-05-18

Fixed an issue where NDI5 could not properly decode THE NDI4 version of the H265 live stream
Fixed an issue with Youtube livestreaming that was not smooth

Note: applicable to any version after 20211201


2022-04-24

Upgrade to NDI5(NDI4 users who have purchased the authorization code need to contact customer service to change the authorization code)
Added the HTTP-API interface

Note: applicable to any version after 20211201


2021-12-01

Added integrated calling system and Tally Light support (How to use)
Added the configuration file import and export function
Added the function of modifying background media service configuration files
Verify the format of parameters such as IP on the network Settings page
Recording supports file segmentation
Support special usb flash drive or TF card without partition
Fixed an issue with invalid USB camera audio
Fixed abnormal display of OLED recording status
Fixed an issue where saving parameters caused network input to restart

Note: applicable to any version after 20210123


2021-09-27

Added support for FRP
Built-in SLS service (How to use)
Add the streamID property to the SRT output of the output Settings page
Improved NTP time synchronization
Optimize audio and video synchronization
Resolve possible conflicts between remote access and SRT
Resolve the problem of abnormally high CPU usage in certain cases
Fixed the display of web themes

Note: applicable to any version after 20210123