Record(Setting method for recording files to USB flash drive)

Set the method

This function is used to encapsulate the main code stream of each channel into different file formats and save them in USB disk (FAT32 format).

Note:If your USB drive has been used as a system installation disk, it may have hidden partitions, so it needs to reset the partition.

A. Record config:Perform a quick setup for all channels or a single channel as shown in the figure above.

B. Channels:If “Record config” has been set, then there is no need to set, here only need to pay attention to “recording time”.

C. The “Settings” icon in the upper right corner of the main screen sets the size of the recorded file.

Download:Download recorded files to current computer.